Simrad AP16 Manual de instrucciones descargar pdf (Pagina 43)

Simrad AP16 Autopilot

42 20222121A

− Connect the Robnet2 cable(s) to the control unit connector(s)

Do not over-tighten the mounting screws!

Optional bracket mounting

− Locate the cradle on the mounting site and mark the 4 holes

for the fixing screws on the mounting surface. The bracket

can be mounted as shown on Figure 3-4 or 90° off.

− Drill the 4 mounting holes and screw the cradle to the

ounting surface.

− Use the supplied screws to fasten the control unit to the left

and right brackets.

− Apply the front panel corners.

− Use the two locking knobs to assemble the cradle with the

left and right brackets and adjust the control head to best

viewing angle.

− Connect the Robnet2 cable(s) to the control unit

connector(s).

Figure 3-4 AP16 Bracket mounting

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 101 102

Sin comentarios

Simrad AP16 Manual de instrucciones Pagina 43